Online Laser Type Thickness Measuring System
For lithium-ion battery electrodes
| Model | NSM-RMD |
|---|---|
| Method | Laser type |
| Object | Lithium-ion battery electrodes, capacitors, etc. |
| Principle | Laser type / Reference roll method
|
Product features
- Enables measurement of lithium-ion battery electrodes, which were previously difficult to measure with conventional laser systems
- Measures thickness directly (not basis weight) using a non-contact method
Full-width measurement during sheet production - No licenses, permits, or calibration curves required -- easy to operate
- Dedicated monitor displays thickness trend graphs, maximum, minimum, average, and standard deviation values for quick visual assessment of sheet condition
- Unaffected by sheet material, color, or pattern
- Equipped with automatic thickness monitoring function that triggers alarms when thickness exceeds preset limits
Product specifications
| Measurement range | ～3 mm |
|---|---|
| Measurement width | Up to 1000 mm |
| Measurement pitch | 1 mm～ (in scanning mode) |
| Minimum display value | 0.1 μm |
| Sheet clearance gap | Approx. 3.5 mm (depending on measurement configuration) |
| Power Supply | Three-phase AC 200 V, 50/60 Hz, 1.5 kVA |
| Ambient temperature | 5～40°C |
| Air Pressure | 0.4 MPa clean air |
| Sensor scanning speed | Up to 100 mm/s |
| Line speed | Up to 200 m/min |